ODLC-45 IP67 Constant Current and 0-10V Dimming

Product Liability Disclaimer：For detailed information, please refer to https://www.meanwell.com/serviceDisclaimer.aspx 0.42Kg; 24pcs/ 11Kg/ 0.72CUFT ENVIRONMENT SAFETY & EMC PROTECTION WITHSTAND VOLTAGE ISOLATION RESISTANCE I/P-O/P:3.75KVAC I/P-O/P:100M Ohms / 500VDC / 25℃/ 70% RH SAFETY STANDARDS Compliance to EN55015, EN61000-3-2 Class C (@load≧60%) ; EN61000-3-3,GB17743,GB17625.1,EAC TP TC 020 EMC IMMUNITY EMC EMISSION 111*77*28.5mm(L*W*H) Compliance to EN61000-4-2,3,4,5,6,8,11; EN61547, light industry level(surge immunity:Line-Line:1KV),EAC TP TC 020 UL8750(type”HL”),CSA C22.2 NO.250.13-12;ENEC EN61347-1 & EN61347-2-13 independent, EN62384,GB19510.1,GB19510.14; TOTAL HARMONIC DISTORTION VOLTAGE RANGE Note.3 ODLC-45 -350 ODLC-45 -700 ODLC-45 -1400 350mA 700mA 1400mA 33.25W 44.8W 44.8W 118V 500ms / 230VAC 1200ms/115VAC 47 ~ 63Hz PF>0.95/115VAC, PF>0.92/230VAC, PF>0.9/277VAC@full load (Please refer to "POWER FACTOR (PF) CHARACTERISTIC" section) 86% 85% 83% 0.6A/115VAC 0.4A/230VAC 0.3A/277VAC COLD START 30A(twidth=100μs measured at 50% Ipeak) at 230VAC; Per NEMA 410 57 ~ 95V 38 ~ 64V 19 ~ 32V 84V 50V ODLC-45 -500 500mA 45W 85% 54 ~ 90V 115V ODLC-45 -1050 1050mA 45.15W 84% 26 ~ 43V 63V RATED CURRENT RATED POWER CURRENT TOLERANCE CONSTANT CURRENT REGION Note.2 OPEN CIRCUIT VOLTAGE(max.) CURRENT RIPPLE ±7.0% 5% max. @rated current THD< 20%(@load≧60%/230VAC; @load≧75%/277VAC) (Please refer to “TOTAL HARMONIC DISTORTION” section) MAX. No. of PSUs on 16A CIRCUIT BREAKER 32 units (circuit breaker of type B) / 32 units (circuit breaker of type C) at 230VAC (Please refer to "STATIC CHARACTERISTIC" section) 90 ~ 295VAC AUXILIARY DC OUTPUT Note.5 Nominal 12V(deviation 11.4~12.6)@50mA for ODLC-45A only 45W Constant Current Mode LED Driver ODLC-45 seri e s No load power consumption<0.5W for Blank-Type,<1.2W for ODLC-45A Standby power consumption<0.5W for DA-Type NO LOAD/STANDBY POWER CONSUMPTION WORKING TEMP. MAX. CASE TEMP. Tcase=-20 ~ +85℃ (Please refer to “ OUTPUT LOAD vs TEMPERATURE” section) Tcase=+85℃ BIS IS15885( for ODLC-45-700,1050,700DA,1050DA only), EAC TP TC 004,IP67 approved DALI STANDARDS Compliance to IEC62386-101, 102 for DA-Type only Hiccup mode,auto-recovery after fault condition is removed for DA type； Hiccup mode,re-power on to recovery for other type File Name:ODLC-45-SPEC 2020-11-30 fosc : 70KHz Block Diagram DIM+(DA+) DIM-(DA-) DETECTION CIRCUIT EMI FILTER RECTIFIERS POWER SWITCHING FILTER & RECTIFIERS RECTIFIERS Vo+ VoI/P CONTROL & CURRENT LIMIT PWM&PFC O.L.P. 45W Constant Current Mode LED Driver ODLC-45 seri e s DRIVING METHODS OF LED MODULE ※ This series works in constant current mode to directly drive the LEDs. Typical output current normalized by rated current (%) In the constant current region, the highest voltage at the output of the driver depends on the configuration of the end systems. Should there be any compatibility issues, please contact MEAN WELL. 100 60 (min.) Vo(%) 50 100 Io(%) Constant Current area Hiccup Protection AUX+(for ODLC-45A) AUX-(for ODLC-45A) DIMMING OPERATION ※ 2 in 1 dimming function ‧Output constant current level can be adjusted by applying one of the two methodologies between DIM+ and DIM-: 0 ~ 10VDC, or 10V PWM signal. ‧Direct connecting to LEDs is suggested. It is not suitable to be used with additional drivers. ◎ Applying additive 0 ~ 10VDC ◎ Applying additive 10V PWM signal (frequency range 300Hz ~ 3KHz): Note : 1. Min. dimming level is about 8% and the output current is not defined when 0%< Iout<8%. 2. The output current could drop down to 0% when dimming input is about 0Vdc or 10V PWM signal with 0% duty cycle. +V -V DIM+ DIM- + + + - - - “DO NOT connect "DIM- to Vo-" Additive Voltage +V -V DIM+ DIM- + + - - “DO NOT connect "DIM- to Vo-" Additive PWM signal 0V 1V 2V 3V 4V 5V 6V 7V 8V 9V 10V 10% 0% 20% 30% 40% 50% 60% 70% 80% 90% 100% Output current (%) 0% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% 10% 0% 20% 30% 40% 50% 60% 70% 80% 90% 100% Output current (%) Dimming input: Additive voltage Duty cycle of additive 10V PWM signal dimming input File Name:ODLC-45-SPEC 2020-11-30 45W Constant Current Mode LED Driver ODLC-45 seri e s AUX+(Yellow)* AUX-(Green)* DIM+/DA+(Purple) DIM-/DA-(Gray) ACL(Brown) ACN(Blue) ※ DALI Interface (primary side; for DA-Type) ‧Apply DALI signal between DA+ and DA-. ‧DALI protocol comprises 16 groups and 64 addresses. ‧First step is fixed at 8% of output. Vo+(Red) Vo-(Black) *AUX-/AUX+ only for ODLC-45A 76 78 80 82 84 86 88 90 50% 60% 70% 80% 90% 100% 277V 230V 115V 0 2 4 6 8 10 12 14 16 50% 60% 70% 80% 90% 100% 277V 230V 115V 0.7 0.75 0.8 0.85 0.9 0.95 1 50% 60% 70% 80% 90% 100% 277V 230V 115V File Name:ODLC-45-SPEC 2020-11-30 PF LOAD OUTPUT LOAD vs TEMPERATURE STATIC CHARACTERISTIC TOTAL HARMONIC DISTORTION (THD) POWER FACTOR (PF) CHARACTERISTIC ※De-rating is needed under low input voltage. EFFICIENCY vs LOAD ODLC-45 series possess superior working efficiency that up to 86% can be reached in field applications. ※ 350mA Model,Tcase at 75℃ ※ 350mA Model,Tcase at 75℃ EFFICIENCY(%) THD(%) LOAD (45W) LO AD ( %) -20 -10 0 10 20 30 40 (HORIZONTAL) 20 40 60 80 100 90~295VAC for 350mA Model,200~295VAC for others 90~200VAC for models other than 350mA Model INPUT VOLTAGE (V) LO AD ( %) 90 295 100 90 80 70 60 50 40 135 180 for others for 350mA Model 200 LOAD 45W Constant Current Mode LED Driver ODLC-45 seri e s CASE TEMPERATURE (℃) LO AD ( %) -20 -10 0 15 30 45 60 85 (HORIZONTAL) 20 40 60 80 100 90~295VAC for 350mA Model,200~295VAC for others 90~200VAC for models other than 350mA Model AMBIENT TEMPERATURE,Ta (℃) ※ Tcase at 75℃ 50 File Name:ODLC-45-SPEC 2020-11-30 MECHANICAL SPECIFICATION 45W Constant Current Mode LED Driver ODLC-45 seri e s Case No.ODLC-45 Unit:mm Vo+(Red) Vo-(Black) DIM+/DA+(Purple) DIM-/DA-(Gray) UL1007 22AWG UL1007 22AWG UL1007 18AWG UL1007 18AWG ODLC-45 DC wire No. Assignment(DC OUT) ODLC-45A DC wire No. Assignment(DC OUT) AUX+(Yellow)* AUX-(Green)* Vo+(Red) Vo-(Black) DIM+/DA+(Purple) DIM-/DA-(Gray) ACL(Brown) ACN(Blue) 111 77 3.5 3.5 3.5 3.5 2*ψ4.5 28.5 2.5 150±10 200±10 150±10 200±10 30 30 tc ‧ : M tc ax. Case Temperature Please refer to : http://www.meanwell.com/manual.html INSTALLATION MANUAL AC wire No. Assignment(AC IN) ACL(Brown) ACN(Blue) SVT 18AWG SVT 18AWG SVT 18AWG SVT 18AWG Vo+(Red) Vo-(Black) DIM+(Purple) DIM-(Gray) UL1007 22AWG UL1007 22AWG UL1007 18AWG UL1007 18AWG AUX-(Green) AUX+(Yellow) UL1007 22AWG UL1007 22AWG *AUX-/AUX+ only for ODLC-45A

Specification

Dimensions

Standard Delivery 2-7 Days Under £65 Spend - £3.49 up to £9 (for longer items)Standard Delivery 2-7 Days Over £65 Spend - FREE (*Excluding items over 1m in length)Next Day Delivery** (Order By 2pm For Monday-Friday) -Please contact our sales team on 01295 568 105We give Free Delivery on standard orders over £65*. Any order below £65 incurs an additional £3.49 post and packing fee

• All in stock orders are dispatched on the day they are received if placed before 4pm.
• Standard delivery we will use Royal mail, which is usually around 2-7 working days delivery
• On a courier delivery, which we will often use for larger items, deliver can be expected between 2 and 7 days from the point of order. If for any reason you order is set to take longer than this, we will contact you to keep you informed.
• The website will quote as close to the shipping price as we can, however in some circumstances, with some of the more remote areas of the UK, we will contact you and quote you a price once the order has been received 

We can also deliver into Europe and the rest of the world, but price is dependent on weight and dimensions. Price is variable and is given upon checkout.Often we will quote as close to the price as we can, however in some circumstances, with shipping outside of the UK, we will contact you and quote you a price once the order has been received ** Fornext day delivery (at an additional charge), your order must be placed by 2pm Monday to Friday, any order placed over a weekend for next day delivery will be delivered the following Tuesday. Next day delivery does not include weekend delivery, and as such all orders placed next day on a Friday will be delivered the following Monday, or if after 2pm will be delivered on Tuesday

Damages and Missing Items

If you receive a product that has been damaged on delivery or missing from your delivery, we request that you report this to us within 48 hours. You can report a damage via the online returns system.

Once we have been notified you will initially be responsible for returning the goods, once your returned item is inspected, and providing the product has been returned as required, you may be issued with a refund for the carriage cost incurred.

All our products are backed by a no-nonsense guarantee:

If you order the wrong product, please inform us within 14 working days and we will advise you of the correct product and return procedures. Please note if this is the case, then responsibility and cost of returning this item is that of you the customer.

Damages

If the item you ordered is damaged please advise us within the first 48 hours of receiving and we will collect and replace free of charge.

Cut Cable

As we sell cable by the metre, this often comes cut from a 100m reel. for this reason, cut cable is NON-RETURNABLE

Changed your mind?

• You can return any part of your order, as long as the goods are as new and in the original packaging
• Please do not write on the packaging itself.

How do I return?

• Email us at info@sparkswarehouse.com with the order number, which items you need to return and the reason.
• You will get a confirmation email with shipping guidelines once your return has been accepted 

How soon will I get my refund?

• Once your return is received and inspected, we will send you an email to notify you that we have received your returned item. We will also notify you of the approval or rejection of your refund.
• If you are approved, then your refund will be processed, and a credit will automatically be applied, via the original method of payment, within 28 business days.

Are there any charges for return?

• There are no charges for return
• Original shipping charges is non-refundable
• You are responsible for return shipping charges