Under £10

Test switch for connecting to the emergency lighting unit and for checking the device function.

The optional switch EM 2 test switch is used to check the function of the TRIDONIC EM emergency lighting control gear. It can be connected directly...

The TRIDONIC LLE FLEX LED modules can be easily installed using the practical plug connector. It has the dimensions 2000 x 9 x 5.7 mm.

Clip for mounting the SMART Sensor 5D 19f on the lamp with cover to protect against indirect light

Tridonic SMART Mounting Ring 5DPI

The most important product properties of the TRIDONIC PC 3x14 T5 TEC lp at a glance: - CELMA energy efficiency class A2 - Nominal service life up t...

The most important product properties of the TRIDONIC PC 1x14 T5 TEC lp at a glance: - CELMA energy efficiency class A2 - Nominal service life up t...

Steel cable system for suspended mounting. Suspension height up to max. 1.2 m.

The mounting frame is suitable for all sensors of the 5DP 14f series for direct mounting in the luminaire housing. A supplied shutter can optionall...

The connection cable with a length of 1m from TRIDONIC is used to connect the DALI Interface RS232 PS/S to the connecDIM Gateway G1.

Can be reprogrammed at any time in the system Plastic housing; screw terminal 2.5 - 10mm2; For luminaires of protection class I and II; max. case t...

Product description Can be used as a luminaire installation or as an independent module with snap-on strain relief (see accessories) For luminaires...

Product description NEW: lumDATA (DALI-2 part 251, 252 and 253) Can be used as a luminaire installation or as an independent module with snap-on st...

Tridonic LED EM GREEN HO 300mm CON

High intensity green charging status indicator LED

The most important product properties of the TRIDONIC LED EM GREEN 1000mm CON at a glance: - Emergency lighting control gear for manual testing - F...

The most important product properties of the TRIDONIC LED EM GREEN HO 1000mm CON at a glance: - Emergency lighting control gear for manual testing ...

With the optional two-color LED EM BICOLOR HO 300mm CON you can check the status of TRIDONIC EM control gear. Green indicates "System OK", red indi...

With the practical LED status display, you can easily and safely check the charging status of your suitable TRIDONIC EM control gear. An integrated...

The most important product properties of the TRIDONIC LED EM GREEN 300mm CON at a glance: - Emergency lighting unit for manual testing - For linear...

With the optional two-color LED EM BICOLOR HO 1000mm CON you can check the status of TRIDONIC EM control gear. Green indicates "System OK", red ind...

With the optional two-color LED EM bi-colour, you can check the status of TRIDONIC EM control gear. The color green indicates "System OK", if the d...

With the optional two-color LED EM BICOLOR 300mm CON you can check the status of TRIDONIC EM control gear. Green indicates "System OK", red indicat...

Resistor is base insulated Resistor power 0.25 W Resistor tolerance ± 1%