SLV

DALI dimmable LED power supply with maximum output of 60 W with a voltage of 24 V.

LED driver with output of 40W with a constant current of 700/900/1000mA.

Connecting cable for BATTEN light bars.

Feed-in incl. mains plug for BATTEN light bars.

Rigid direct connector for BATTEN light bars.

Red cable, insulated, 3 x 0.75 mm² x 10 meters.

Black cable, insulated, 3 x 0.75 mm² x 10 meters.

240V halogen fixture for GU10 socket with 15 cm connection cable.

White cable, insulated, 3 x 0.75 mm² x 10 meters.

Transparent cable, insulated, 3 x 0.75 mm² x 10 meters.

Steel cable suspension, incl. 3 cable clips, 1.5mm x 5000mm, with one nippled end

Stopper for steel cable 0.75mm, incl. grub screw 10 x M4 x 5.

Lens for SUPROS 78 with a beam angle of 40°.

Lens for SUPROS 78 with a beam angle of 20°.

Black plastic earth spike, 17.5 cm length.

LED power supply providing 24V constant current for wattages 0-150W.

LED power supply providing 24V constant current for wattages 0-150W. This product is IP44 splash water protected and equipped with a cable gland.

Dimmable LED driver with 1050mA constant current and an output of 0-40W. Dimmable with reverse phase controller. LED connection must be made with s...

Dimmable LED low-voltage reflector lamp made by PHILIPS, ideal as a replacement for LV halogen lamps with a G53 socket. These dimmable LED lamps ar...

Dimmable LED driver with output of 14.7W with a constant current of 700mA.

Dimmable LED driver providing 500mA constant current for 9-15 Power LEDs. Series connection of LEDs required.

Dimmable LED driver with 700mA constant current to connect between 6W and 10.5W max. LED connection must be made with series circuits.

Dimmable LED driver providing 350mA constant current for 4-6 Power LEDs. Series connection of LEDs required.

LED power supply providing 24V constant current for wattages 0-100W.