Under £10

Product Details Status indication bi-colour LED, with lead and connection plug. Green: system OK, red: fault. · Plug connection

With the optional two-color LED EM BICOLOR 1000mm CON you can check the status of TRIDONIC EM control gear. Green indicates "System OK", red indica...

The ready-made resistor ADV Plug Type D YL for current setting with 54.90 kiloohms from Tridonic is compatible with all Tridonic LED drivers of the...

The ready-made resistor ADV Plug Type A BR for current setting from Tridonic is compatible with all Tridonic LED drivers of the LC flexC ADV series...

Product Details Status Indication Green LED complete with lead designed specifically for the purpose of indicating when a charging current is ...

With the optional two-color LED EM bi-colour high brightness, you can check the status of TRIDONIC EM control gear. Green indicates "System OK", re...

The Tridonic I-SELECT 2 PLUG 700MA BL plug is a ready-to-use resistor to set output current value. This is compatible with LED drivers featuring I-...

Module LLE 24mm 1250lm HV ADV6 Modules LLE advanced LLE 24x70mm 325lm HV ADV5 LLE 24x140mm 650lm HV ADV5 LLE 24x280mm 1250lm HV ADV5 ...

Product description Optional strain-relief set for independent applications Transforms the LED driver into a fully class II compatible LED driver ...

With the optional accessory clip, you can mount the TRIDONIC SMART sensors on the lamp. The sensor is then optimally protected against indirect lig...

Mounting frame for Tridonic sensors 5DP 14fThe mounting frame is suitable for all Tridonic sensors 5DP 14f. It is used for direct attachment in the...

With the ACU SC 30x43x30mm CLIP-ON SR PA SET, Tridonic offers a practical, optional strain relief set for independent applications. With the set, y...

Two-color LED for status displayWith the optional two-color LED from Tridonic, you can check the status of your control gear: Green means "System O...

FK 75 M20 moisture-proof box 88x88x42

Accessories Tridonic LED Connection Cable

This strain relief expands your LED Driver into a fully Class II compatible LED Driver (e.g. for ceiling installation) and can be mounted on the dr...

Accessories TRIDONIC ACL BRIDGE LLE16 PUSH-FIX

The separate green LED from TRIDONIC is used to display the charging current flow of the TRIDONIC EM converter. It is 60 mm long. TRIDONIC offers a...

Resistor TRIDONIC I-SELECT 2 PLUG 275MA BL

Ready-made resistor for 1000mA and 5.00 kO for setting the current of TRIDONIC LED control gear

Dimming range 1 to 100% Protection class IP20 5-year guarantee Flat metal housing with white cover Suitable for escape route lighting systems accor...

Ready-made resistor for 1050mA and 4.75 kOhm for setting the current of TRIDONIC LED control gear

Ready-made resistor for current setting Compatible with LED drivers with I-select 2 interface; Not compatible with I-SELECT (Generation 1)Resistor ...