ELP LM240LID KIT
Got a question about this product? Get in Touch
Got a question about this product? Get in Touch
LDM Range
The ELP ENEC marked LDM emergency LED control gear allows emergency lighting operation of high-power LED modules when used in conjunction with the standard mains voltage LED control gear.
The emergency control gear incorporates a module/charger and a high temperature Nickel Cadmium or Lithium Iron Phosphate (LiFePO4) battery. In the event of a mains failure an integral 2-pole relay disconnects the LED lighting load from the mains control gear and then connects it to the emergency control gear which operates the LED module at an optimum light output for the rated duration.
It is important to note that some LED mains control gear should not be operated with an open circuit load, to overcome this problem theĀ LDMĀ range features a live in/ live out relay which ensures the load is in place before the mains driver is powered up.
In Self-test mode the function and duration tests will take place at randomised times. If required, testing can be programmed to occur at a designated time by turning the unswitched supply off and on 3 times in 10 seconds at the required time. Note: The function test will occur weekly at the same time.
SECTION | SUBJECT | |
---|---|---|
Environmental | Protection against electric shock | |
Ingress protection | ||
Module rated operating ambient temperature | ||
Battery rated operating ambient temperature | ||
Maximum case temperature | ||
Mains Operation | Rated voltage supply | |
Mains frequency | ||
Mains supply current | ||
Mains supply power | ||
Power factor | ||
Mains overvoltage protection | ||
Indicator LED | 2 wire red/green - DALI LDM |
|
Maximum power that can be switched via relay contacts | ||
Maximum current that can be switched via relay contacts | ||
Maximum voltage that can be switched via relay contacts | ||
Emergency Operation | Emergency duration | |
Battery chemistry type | ||
Number and type of high temperature cells LDM90Ā andĀ LDM90D |
4 x NiCd 1.8Ah sub-C cells |
|
LDM200Ā andĀ LDM200D | ||
LDM90MO,Ā LDM200MO,Ā LDM90MODĀ andĀ LDM200MOD | ||
LDM90HO,Ā LDM200HO,Ā LDM90HODĀ andĀ LDM200HOD | ||
Battery recharge period | ||
Time to full illuminance | ||
Battery charge current NiCd 1.8Ah sub-C cells 2 stage charge - boost/trickle LiFePO4 2.1Ah and 3Ah cells - voltage dependent, constant current |
100mA/70mA Ā±10% 0 - 150mA |
|
Battery discharge current range (at nominal battery voltage) NiCd 1.8Ah sub-C cells LiFePO4 2.1Ah 26650 cells LiFePO4 3Ah 26650 cells |
360mA to 560mA (450mA) 475mA to 735mA (550mA) 650mA to 1000mA (750mA) |
|
Module operating current -Ā see separate graphs. LDM90Ā andĀ LDM90D |
134mA to 19mA Ā±10% |
|
LDM90MOĀ andĀ LDM90MOD | ||
LDM90HOĀ andĀ LDM90HOD | ||
LDM200Ā andĀ LDM200D | ||
LDM200MOĀ andĀ LDM200MOD | ||
LDM200HOĀ andĀ LDM200HOD | ||
Module output voltage range (nominal power) LDM90Ā andĀ LDM90D |
12V to 90V (1.6W) |
|
LDM90MOĀ andĀ LDM90MOD | ||
LDM90HOĀ andĀ LDM90HOD | ||
LDM200Ā andĀ LDM200D | ||
LDM200MOĀ andĀ LDM200MOD | ||
LDM200HOĀ andĀ LDM200HOD | ||
EOFI - dependant on LED module type | ||
A record is kept of the number and length of emergency and mains operations - this information can be downloaded via the internal programming connector | ||
Mechanical | Module outside dimensions | |
Fixing centres | ||
Electrical connections | ||
Standards Compliance | EN61347-1, EN61347-2-7, EN61347-2-13 and EN62384 | |
EN62034*, EN62386-101*, EN62386-102* and EN62386-202* | ||
EN55015 | ||
EN61547 | ||
Marks CE |
Ā
Standard Delivery 2-7 Days Under Ā£65 SpendĀ - Ā£3.49 up to Ā£9 (for longer items)Standard Delivery 2-7 Days OverĀ Ā£65 SpendĀ - FREE (*Excluding items over 1m in length)Next Day Delivery** (Order By 2pm For Monday-Friday) -Please contact our sales team on 01295 568 105We give Free Delivery on standard orders over Ā£65*. Any order below Ā£65 incurs an additional Ā£3.49 post and packing fee
We can also deliver into Europe and the rest of the world, but price is dependent on weight and dimensions. Price is variable and is given upon checkout.Often we will quote as close to the price as we can, however in some circumstances, with shipping outside of the UK, we will contact you and quote you a price once the order has been receivedĀ **Ā Fornext day delivery (at an additional charge), your order must be placed by 2pm Monday to Friday, any order placed over a weekend for next day delivery will be delivered the following Tuesday. Next day delivery does not include weekend delivery, and as such all orders placed next day on a Friday will be delivered the following Monday, or if after 2pm will be delivered on Tuesday
If you receive a product that has been damaged on delivery or missing from your delivery, we request that you report this to us within 48 hours. You can report a damage via the online returns system.
Once we have been notified you will initially be responsible for returning the goods, once your returned item is inspected, and providing the product has been returned as required, you may be issued with a refund for the carriage cost incurred.
If you order the wrong product, please inform us within 14 working days and we will advise you of the correct product and return procedures. Please note if this is the case, then responsibility and cost of returning this item is that of you the customer.
If the item you ordered is damaged please advise us within the first 48 hours of receiving and we will collect and replace free of charge.
As we sell cable by the metre, this often comes cut from a 100m reel. for this reason, cut cable is NON-RETURNABLE